Search Results - Manufacturing

10 Results Sort By:
Triple Ridge Waveguide Laser
High-power semiconductor lasers that operate in the fundamental spatial mode are highly desired in a broad number of applications like optical communication, laser surgery, and more. An index-guided ridge waveguide (RW) structure is used to maintain single-mode operation in a transverse direction. Normally, these RW lasers will suppress or cut-off higher-order...
Published: 6/2/2021   |   Inventor(s): Lin Zhu, Xiaolei Zhao, Yeyu Zhu, Siwei Zeng
Keywords(s):  
Category(s): Manufacturing
Coherence Length Gated Microwave Photonics Interferometric (CMPI) System for Faster Signaling Processing
High sensitivity distributed sensing method for both dynamic and static measurement is needed for structural health monitoring, seismic wave detection, and in situ underground deformation monitoring for geophysical and geotechnical applications. These systems are immune to electromagnetic interferences, can operate longer, and perform better in harsh...
Published: 12/9/2020   |   Inventor(s):  
Keywords(s):  
Category(s): Manufacturing
Multi-laser Process for Fast Fabrication of Nanocrystalline
Semiconducting metal oxide (SMO) gas sensors have been developed for a wide range of applications such as safety monitoring, environmental sending, and medical diagnostics. 1D nanocrystalline SMO has shown great gas sensing response since their microstructure can facilitate surface reactions. However, the fabrication process of SMO gas sensors such...
Published: 12/9/2020   |   Inventor(s): Hai Xiao, Jincheng Lei
Keywords(s):  
Category(s): Manufacturing
Processing Technique for Ceramic- based Energy Conversion and Storage Devices
Due to rising carbon emissions, extreme weather events and other environmental threats, the demand for alternative energy sources is greater than ever. Therefore, businesses and communities are asking for three things: more affordable electricity, more resilient power, and cleaner energy. Fuel cells, electrolysis cells, membrane reactors, and solid-state...
Published: 12/2/2020   |   Inventor(s): Shenglong Mu, Rajendra Bordia
Keywords(s):  
Category(s): Manufacturing
Tunable System for Generating Higher Order Bessel Beams
The use of a turntable system in conjunction with an acousto-optic deflector (AOD) can allow for fast and continuous tuning of the orbital angular momentum (OAM) topological charge number of the output of Bessel beams. This technique uses a simple and effective approach that is capable of generating beams with integer topological and fractional charge...
Published: 11/10/2020   |   Inventor(s): Jerome Miller, Eric Johnson, Richard Watkins
Keywords(s): Communications, Imaging
Category(s): Manufacturing
A Rapid Method for Determining the Complete Frequency-Dependent Electrode Impedance Response
Traditionally, capturing the low frequency response of electrodes involves having to capture the entire frequency range of impedance. The most critical impedance element of an electrode typically involves the low frequency response where the electrode polarization resistance is determined. Depending on the electrode and electrolyte, low frequency impedance...
Published: 11/9/2020   |   Inventor(s): Jeremy Gilbert, Piyush Khullar
Keywords(s):  
Category(s): Manufacturing
Terbium Oxyhydroxide for Better Faraday Rotators
This crystal growth method utilizes a hydrothermal process to produce single crystals for use in high-power industrial lasers. The global market for industrial lasers is projected to grow from $4.6 billion in 2015 to $6.3 billion by 2020, reflecting a sustained increase in manufacturing interest. The industry standard, Terbium Gallium Garnet (TGG),...
Published: 10/27/2020   |   Inventor(s): Joseph Kolis, Duminda Sanjeewa, Kyle Fulle
Keywords(s): Photonic Crystals
Category(s): Manufacturing
Expanding the Composite Manufacturing Process Through Folding
This approach to the manufacturing of fiberglass reinforced plastic composites allows for the fabrication of the structure without the use of molds. Molds are extremely advantageous for producing repeating plastic composite designs, but are not desirable to use for the manufacturing of a unique structure. In many architectural applications, unique...
Published: 9/26/2018   |   Inventor(s): Joseph Choma, Brian Leounis, Tyler Rodgers, Caleb Roberts, Sarah Pyne, Keith Sosebee, Christian Bravo, Reginald Wilson
Keywords(s):  
Category(s): Advanced Materials, Manufacturing
Self-Powered Wireless Sensor
This novel, self-powered sensor technology enables wireless transmission over a range of tens of meters without a motor or active power supply. The smart sensor market is expected to grow from 18.58 billion USD in 2015 to 57.77 billion USD by 2022, with the wireless sensor market share expected to reach over $940 million by 2020. However, all commercially...
Published: 3/13/2018   |   Inventor(s): Sai Sunil Kumar Mallineni, Herbert Behlow, Yongchang Dong, Ramakrishna Podila, Apparao Rao
Keywords(s):  
Category(s): Manufacturing, Advanced Materials
Lignocellulose-Sulfur Composite Materials for Construction Applications
These composites chemically combine abundant agricultural and petrochemical wastes, allowing for practical reduction of inert wastes that can be used to either supplement or replace traditional construction materials. Approximately 7 million tons of waste sulfur and 5 million tons of waste lignocellulose are produced each year. Only a quarter of these...
Published: 2/20/2018   |   Inventor(s): Rhett Smith, Andrew Tennyson
Keywords(s): Energy - Green Technology, Energy - Petrochemical, Petroleum Refining, Polymers/Composites, Sustainable Construction, Sustainable Manufacturing, Textiles/Fibers - Non-Optical/Medical/Other
Category(s): Manufacturing, Agriculture, Sustainable Environment
© 2022. All Rights Reserved. Powered by Inteum